HP Deskjet 6840 Driver for Mac: A Step-by-Step Guide

The HP Deskjet 6840 is an excellent printer, but setting it up on a Mac can be a bit tricky. In this article, we'll walk you through the process of installing and configuring the printer driver for your Mac.

Step 1: Connect the Printer to Your Router

To start, connect the printer to your router using an Ethernet cable. This will allow you to access the printer's internal web page and configure its network settings.

Step 2: Access the Printer's Web Page

Once connected, print out the network configuration page by pressing the button with the check mark. This will give you the IP address of the printer. Open a web browser and navigate to this IP address to access the printer's internal web page.

Step 3: Configure the Network Settings

On the printer's web page, select 'Network' then 'Wireless.' Here, you'll need to enter your router's SSID (network name) and WPA-PSK encryption key manually. Make sure to enable the radio and set the mode to Infrastructure.

Step 4: Set Up the Printer Driver

To install the printer driver on your Mac, follow these steps:

1. Highlight the port for your printer and check 'Enable Bidirectional Support.'

2. Set the data type to RAW, and hit OK.

3. Click the Ports tab and select the print processor from your printer manufacturer (e.g., HP).

4. Open Devices and Printers -> right-click the icon for your printer -> Printer Properties -> Advanced tab -> Print Processor button.

Step 5: Verify the Connection

To verify that the connection is working, try printing a network configuration page. This should confirm that the printer has a good IP address and is connected to your router.

Troubleshooting Tips

If you're having trouble connecting your printer to your Mac, here are a few troubleshooting tips:

* Make sure your router is not set for WPA2 Personal (aka WPA2-PSK).

* Check that your print processor is set correctly.

* Verify that your printer's network configuration page has a good IP address.

In conclusion, setting up the HP Deskjet 6840 driver on your Mac requires some technical know-how, but by following these steps, you should be able to get it working in no time. Remember to check your router settings and print processor configuration to ensure a smooth connection.

Hp deskjet 6840 driver for mac